The High Cost of Plumbing Leaks

8/28/2015 (Permalink)

Repair leaks promptly - If you have a leaky faucet, toilet or pipe in your home, fix it immediately before it becomes a much bigger and more expensive problem. Even if it’s a slow leak, such as a dripping faucet, it can account for more than 10 percent of your water usage.

If you don’t know if you have a leak, your water meter readings can provide the clue. When water is not in use, check the meter twice in a two-hour time span. If the readings change, then there is a leak somewhere in your home.

If you can't determine the source of the leak but your meter readings indicate you definitely have one, call in a professional plumber. You may have a leaky pipe behind a wall, and if left alone, will cause extensive damage that ruins the drywall, deteriorates the framing over time and causes mold growth. A leaky pipe is also an early sign of a burst pipe, which will result in greater damage to your home.

Stop a running toilet - A running toilet can cost you hundreds of dollars and is a major contribution to a costly water bill. It is generally the result of broken internal parts. It could be that a simple repair on the valves is needed, or there could be a larger issue.

"Many people think that showering or doing laundry uses the most water, but actually, the toilet accounts for the largest use of water in a home. If you have a leaky or running toilet, your water bill can skyrocket," explained Tim Flynn, owner. "If you hear the toilet running or it flushes slowly or overflows often, get it checked out right away. Clogged drains waste water as well and can become a major problem."

Waiting for hot water - If you turn on the sink or shower and wait anywhere from 30 seconds to over a minute for the water to heat up, precious gallons of clean water go down the drain. You are paying for that water to get hot while it runs. Consider replacing your traditional storage water heater with a Tankless Water Heater or installing a Hot Water Recirculating System. Recirculation pumps will get the water to the faucet faster and keep it hot in the line longer. They usually cost approximately $1000, which can be recouped in about two and a half years. Either system will ensure immediate delivery of hot water when you need it and provide significant water savings.